📖 The Ultimate Guide to Square Pipe Weight
Understanding the square pipe weight is crucial for logistics, structural engineering, cost estimation, and project planning. This guide, paired with our powerful ms square pipe weight calculator, provides everything you need to know about calculating the weight of hollow square sections for any material, from Mild Steel (MS) to Stainless Steel (SS) and beyond.
⚙️ The Formula for Hollow Square Pipe Weight
Calculating the weight of a hollow square pipe is a straightforward process based on its volume and the density of the material. The core principle is to find the volume of the material and then multiply it by its density.
The formula is:
Weight = [(Outer Side)² - (Inner Side)²] × Length × Density
Where:
- Outer Side (A): The full width of the square pipe.
- Inner Side (B): The width of the hollow inner section. This is calculated as `Outer Side - (2 × Wall Thickness)`.
- Length (L): The total length of the pipe.
- Density (ρ): The mass per unit volume of the material (e.g., MS is ~7850 kg/m³).
Our square pipe weight calculator automates this entire calculation, handling all unit conversions seamlessly so you can work in mm, inches, or gauges without hassle.
📊 Material Density Chart
The accuracy of your weight calculation depends heavily on using the correct density for your material. Below is a chart with common materials used for square pipes. You can select these directly in our calculator.
| Material | Density (kg/m³) | Density (lb/in³) |
|---|---|---|
| Mild Steel (MS) | 7850 | 0.2836 |
| Stainless Steel (SS 304) | 8000 | 0.2890 |
| Stainless Steel (SS 316) | 7980 | 0.2883 |
| Iron (Wrought) | 7750 | 0.2800 |
| Aluminum (6061) | 2700 | 0.0975 |
| Copper | 8960 | 0.3238 |
| Brass | 8500 | 0.3070 |
| Titanium | 4500 | 0.1626 |
📋 Interactive MS Square Pipe Weight Chart
While many search for a static "ms square pipe weight chart pdf" from manufacturers like Tata, our interactive tools are far more flexible. The calculator above can find the weight for any size, but here is a reference chart for common MS square pipe sizes. This serves as a quick reference similar to a Tata MS square pipe weight chart.
| Size (mm) | Thickness (mm) | Weight per Meter (kg/m) | Weight per Foot (kg/ft) |
|---|---|---|---|
| 25 x 25 | 1.6 (16 Gauge) | 1.18 | 0.36 |
| 25 x 25 | 2.0 (14 Gauge) | 1.45 | 0.44 |
| 40 x 40 | 1.6 (16 Gauge) | 1.94 | 0.59 |
| 40 x 40 | 2.0 (14 Gauge) | 2.39 | 0.73 |
| 40 x 40 | 2.5 (12 Gauge) | 2.95 | 0.90 |
| 50 x 50 (~2 inch) | 1.6 (16 Gauge) | 2.45 | 0.75 |
| 50 x 50 (~2 inch) | 2.0 (14 Gauge) | 3.03 | 0.92 |
| 50 x 50 (~2 inch) | 3.0 | 4.46 | 1.36 |
| 75 x 75 | 3.0 | 6.80 | 2.07 |
This table is especially useful for finding values like the 40 x 40 mm square pipe weight or the 2 inch ms square pipe weight quickly.
✨ Interactive SS Square Pipe Weight Chart (SS 304)
Stainless steel has a slightly different density than mild steel. This table acts as a reference for a Jindal stainless steel square pipe weight chart or a general SS square pipe weight chart for grade 304.
| Size (mm) | Thickness (mm) | Weight per Meter (kg/m) | Weight per Foot (kg/ft) |
|---|---|---|---|
| 25.4 x 25.4 (1 inch) | 1.5 | 1.15 | 0.35 |
| 38.1 x 38.1 (1.5 inch) | 1.5 | 1.76 | 0.54 |
| 38.1 x 38.1 (1.5 inch) | 2.0 | 2.32 | 0.71 |
| 50.8 x 50.8 (2 inch) | 1.5 | 2.38 | 0.72 |
| 50.8 x 50.8 (2 inch) | 2.0 | 3.14 | 0.96 |
| 50.8 x 50.8 (2 inch) | 3.0 | 4.64 | 1.41 |
This chart helps you instantly find the 1.5 inch square pipe weight or values for a square tube SS 304 square pipe weight chart.
❓ Frequently Asked Questions (FAQ)
Q: How does the gauge to mm conversion work?
A: When you select "gauge" in the thickness unit dropdown, our calculator uses the standard sheet metal gauge conversion for steel. For example, a 14 gauge square pipe weight calculation will use a thickness of approximately 2.0mm.
Q: Is this also an iron square pipe weight chart calculator?
A: Yes! Simply select "Iron" from the material dropdown. The calculator will use the correct density to provide an accurate weight, effectively creating a custom iron square pipe weight chart for your specific dimensions.
Q: How do I find the weight of a 1/2 inch square pipe?
A: Easy. In the calculator, enter "0.5" in the "Outer Side" field and select "inch" from the dropdown. Then enter the thickness, length, and material to get the exact weight.
Q: What about the axis of symmetry?
A: While the axis of symmetry is a key geometric property of a square, it's not directly used in the weight formula. The weight calculation relies on the area of the cross-section. However, a square pipe has four axes (or lines) of symmetry, which is what gives it its balanced structural properties.
🌟 Conclusion: Precision at Your Fingertips
Moving beyond static PDF charts, this dynamic square pipe weight calculator offers unparalleled flexibility and accuracy. Whether you are calculating the square pipe weight per meter for a small project or estimating the total tonnage for a large-scale construction, this tool is designed to provide instant, reliable results. Bookmark this page for all your future hollow square pipe weight calculation needs.
